Electric Pipe Threader Hire
Gloves / Goggles
Full working and safety instructions are attached to the machine
On Stand Electric Pipe threader 1/2-3”
Heavy Duty Automatic Chucking. Threads a wide range of material including black and galvanized pipe, stainless steel, IMC, PVC and heavy-wall conduit.
Induction motor (81 db) delivers constant 45 or 16 RPM as required.
Constant and proper lubrication of dies and workpiece with through-head oiling.
Triple filtration provides for longer oil pump life and clean threads.
Special jaw inserts allow for quick, easy replacement.
Pipe Capacity: 1/8″-2″ (3mm-50mm) 2 1/2″-4″ (62mm-100mm) with No. 141 geared threader
Bolt Capacity: Bolt: 1/4″-2″ (6mm-50mm).
Motor: 1 1/2 HP, single-phase, 60 Hz or 50 Hz, induction.
Motor Control: Open/Off/Close, heavy-duty rotary type switch and integral safety foot switch.
Spindle Speed: 45 and 16 RPM, right-hand, can be adapted to left-hand operation.
Transmission: Two-speed (45 RPM for up to 1 1/4″ pipe and 1″ bolt, 16 RPM for low voltage and higher torque applications).
Front Chuck: Automatic gripping/centering.
Rear Centering Device: Automatic, centering only.
Cutter: Model 364, 1/8″-2″ full-floating, self-centering with E-1032 Cutter Wheel.
Reamer: Model 344, 1/8″-2″ right-hand only.
Clutch: Shiftable cone type.
Oil Pump:: Self-priming gerotor.