Prop Pal Needle System Hire

The Prop Pal needle system hire from Edwards Plant & Tool Hire is designed so that a builder’s prop locates into the needle and is locked in position once it has been wound up, unlike some of the conventional and unsafe methods used in the building trade to date.

At the other end the swivel plate has 4 holes where it can be fixed to the floorboards, securing it in position. This equals minimal disturbance to flooring and ceiling when using the jacking screw plate.

The Prop Pal needle system unit can also double up as a standard support needle by removing the swivel plate assembly, This then leaves safe locked in positioning for both props at each end.

The Prop Pal Needle system for hire only requires the removing of a single brick to pass the Prop Pal needle system through the wall.

Installation is quick and easy!

1. Prop Pal needle is passed through the hole in the wall from inside to the outside with the swivel plate resting it can be positioned and fixed to the floor.

2. A builder’s prop is inserted and pinned at required location to allow the winding up.

3. Prop and needle can be wound up to support the masonry.


Other benefits and features of the Prop Pal needle include the following

Manufactured in the UK!

Only needle support in the building trade to include a jacking support system to provide extra stability and safety for temporary wall support.

The jacking support can be adjusted to securely support the inner leaf wall whilst the acrow supports the external.

Minimal disturbance to walls, ceiling and timber floors can be left intact.

Greater access for inserting steel beams – Prop Pal needle length: 1200mm

Dimensions of needle ensure that it will slide through an aperture (on a home property wall) the size of a metric size brick:  215 x 60mm

Takes the stress from hiding steel beams.

Secure fastening to internal floors.

Load capacity 1050KG.

Secure locking of props.

Takes away the uncertainty from propping. No lateral force on builders props as weight is transferred along the Prop Pal needle down through standard builders props.

No lateral force on the props which can cause them to bend.

Support cavity walls evenly and more securely due to its strength resulting in little or no deflection.

You can also purchase Prop Pal Needle System extra plates to attach to the base of the jacking screw plate to slot a prop in giving builders an extra 100mm in space between props and saves time when wanting to use Prop Pal as a standard needle. You can still remove the jacking screw plate to slot props at both ends of the needle system if you want to. The versatility of Prop Pal: Using Prop Pal as a standard needle enables builders to support masonry and steel beams in a traditional manner as well as supporting walls above the floor chamber as originally designed for – In effect this gives builders a dual application for using Prop Pal. 

Clear dates

Additional Information

Additional information


Prop Pal Needle System Hire


Full working and safety instructions are attached to the machine


Prop Pal needle Spec


There are no reviews yet.

Be the first to review “Prop Pal Needle System Hire”

Your email address will not be published.

Related Products